Aerotech ALS5000 Linear Motor Stage ALS5000 直线电机平台设计用来满足大多数苛刻应用的需求。高刚性的基体,全密封的金属盖板和大推力的直线电机使得 ALS5000 直线电机平台成为激光加工,陶瓷雕合或任何其它要求在同一个制造环境中需要高精度应用的理想选择。 行程: 1000 mm 定位精度: ±1.0 μm 负载: 135 kg zPictures/Product_430.jpg ALS5000 平台性能指标 Rugged construction Hard-coated tabletop and waycovers Fully integrated cable management system High-accuracy, noncontact linear encoder Sealed design with optional air purge The ALS5000 was designed to meet the needs of the most demanding applications. A rigid base, fully-sealed metal waycovers, and high power linear motor make the ALS5000 the stage of choice in laser machining, ceramic scribing, or any other application requiring high accuracy in a production environment. Rugged Construction The greatest attention to detail is evident in all aspects of the ALS5000 design. The tabletop utilizes stainless steel HelicoilTM inserts to protect mounting holes against thread wear. An integral metal waycover is provided to protect the stage from hot sparks or debris. Both the metal waycover and tabletop are treated with a hardcoat (Rockwell 62 hardness) that is scratch-resistant and provides outstanding protection in the harshest applications. To further provide the stage with protection from a caustic environment, the ALS5000 utilizes Aerotech’s unique tensioned side-strap system. The straps are in a vertical orientation that prevents debris from accumulating on top of them, and are tensioned to create a tight seal. An optional air-purge is available that allows air to be forced into the body of the stage. This creates a positive pressure that prevents any particulate, no matter how fine, from entering the stage. To aid in system assembly, the base mounting holes are located outboard of the stage. Therefore, the stage can be mounted without removing the hardcover. High Performance The base of the ALS5000 is machined from special aluminum alloy tooling plate to provide high stiffness and long-term stability. Sealed linear motion guide bearings with integral wipers are incorporated to provide excellent payload capability and long life, even with heavy offset loads. Noncontact linear encoders with submicron repeatabilities are standard on all ALS5000 series stages. Optional HALAR and HALSF factory calibration options are available that further increase the standard accuracy, straightness, and flatness specifications to even finer precision. Linear Motor Drive Aerotech’s high-power, cog-free, BLM series linear motor drives the ALS5000 to a maximum speed of 2 m/s and acceleration of 3 g. This zero cogging design is ideal for applications requiring outstanding contour accuracy and smooth velocity profiling. As with all of Aerotech’s ALS series linear motor stages, the linear motor has zero backlash, no windup, zero friction, and outstanding system responsiveness. Notes: 1. Current values based on high performance (-P) magnet track. 2. Maximum speed based on stage capability. Maximum application velocity may be limited by system data rate and system resolution. 3. Maximum load based on bearing capability. Maximum application load may be limited by acceleration requirements. 4. Available with Aerotech controllers. 5. Specifications are for single-axis systems, measured 50 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.