MCG直流无刷和有刷伺服电机

MCG 是 AMETEK 旗下生产直流无刷伺服电机、直流有刷伺服电机和直流伺服驱动器的专业制造商，MCG 拥有I、IB、AB、MA系列直流无刷伺服电机，ID系列直流有刷伺服电机，B3600、BMC系列直流无刷伺服驱动器，以及DMC系列直流有刷伺服驱动器，产品线规格齐全，可满足您多种应用要求，为您提供较恰当的解决方案。
 
 	 	MCG 直流无刷伺服电机
 

MCG I 系列无刷伺服电机
The I Series brushless motors have been designed to provide a family of brushless motors in 3 different NEMA style frame sizes: 23, 34 and 56, each in multiple lengths. They provide continuous stall torque from 0.11 to 6.57 Nm (1.00 – 58 lb-in) and peak torque from 0.34 to 19.5 Nm (3.01 – 173 lb-in).
 

MCG IB 系列无刷伺服电机
The IB Series brushless motors have been designed to provide a family of brushless motors in 4 different NEMA style frame sizes: 17, 23, 34 and 56, each in multiple lengths. They provide continuous stall torque from 0.07 to 6.1 Nm (0.63 – 54.0 lb-in) and peak torque from 0.350 to 18.3 Nm (3.1 – 162 lb-in).
 

MCG AB 系列无刷伺服电机
The AB Series brushless motors have been designed to provide a family of brushless motors in 3 different NEMA style frame sizes: 23, 34 and 56, each in multiple lengths. They provide continuous stall torque from 0.42 to 12.88 Nm (3.75 – 114 lb-in) and peak torque from 1.28 to 38.3 Nm (11.3 – 339 lb-in).
 

MCG MA 系列无刷伺服电机
MA Series Integrated Motor & Drive
The MA34000 Series of integrated brushless motor & drives are optimized for the specific motor’s operating parameters. The standard MA34000 series are available in different lengths with rated power from 168 watts (1/5 Hp) to 747 watts (1 Hp) at speeds of 1750 and 3450 RPM.
 
 	 	MCG 直流有刷伺服电机
 

MCG ID 系列直流有刷伺服电机
The ID23000 and ID33000 series are ideal motors for applications using a simple DC brush drive for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads. Low cogging torque and simple brush commutation provides smooth performance at all speeds.
Typical applications include factory automation machinery, labeling machinery, machine tools, material handling machinery, medical equipment, packaging machinery, printing machinery, robotics, x-y tables, textile machinery, applications which require smooth operation and/or applications which have medium to high reflected load inertias.
Features and benefits:
2 frame sizes (NEMA 23 and NEMA 34)
Continuous torques range from 0.212 Nm (1.88 Lb-in) to 1.59 Nm (14 Lb-in).
IP42 construction
 
 	 	MCG 直流伺服驱动器
 

MCG B3600 系列直流无刷电机驱动器
Variable Speed Brushless Drive
The B3605S & B3610S are single-quadrant PWM speed drives for commutating and controlling three-phase brushless motors. The B3600 performs closed loop velocity control via the motor Hall effect devices.
The B3605S & B3610S are suitable for a wide variety of commercial and light industrial applications such as pumps, actuators, blowers & fans, fluid metering, textile machinery and mixing equipment and where a single direction control is needed.
The drive is a single board (2.0 x 3.5 x 0.955 in) which requires a single DC Supply Input of 12 or 15 – 36 Vdc (jumper selectable) in 5 and 10 amp models. Speed can be controlled via on-board trimpot, external POT or external 0-5 Vdc command. Direction of rotation option can be preset or controlled externally.
 

MCG BMC 直流无刷伺服驱动器
Brushless Servo Drives
The economical and compact BMC Series are analog 4 quadrant brushless servo drives with +/- 10 Vdc command input. All models are designed with protection against over-current, over-heating, and short circuit across motor, ground, and power leads. All models interface with digital controllers or can be used as stand-alone drives.
The BMC6C & BMC7D require DC power supply and the BMC12L & BMC12H operates directly off line. They are switch configurable units for 3 standard configurations – torque, velocity, and open loop control.
 

MCG DMC 系列直流有刷伺服驱动器
Brush Servo Drives
The economical and compact DMC Series are analog 4 quadrant brush servo drives with +/- 10 Vdc command input. The DMC series are available in 2 models.
A single red/green LED indicates operating status. All models are designed with protection against over-current, over-heating and short circuit across motor, ground and power leads. Both models interface with digital controllers or can be used as stand-alone drives.
The DMC require DC power supply. They are switch configurable units for 4 standard configurations – torque, velocity, voltage and IR compensation model